Synthetic Resins
 

For use in Paint & Printing Ink Industry

 

AMINO RESINS – BUTYLATED

PRODUCT CODE

TYPE

COLOUR ON GARDNER

FREE FORMALDEHYDE

ACID VALUE MAX

%  NVM

TOLERANCE MTO

VISCOSITY AS SUCH AT 30oC poise

SUGGESTED USES

SR-3001

Melamine Formaldehyde

1 max

2% max

2

60 + 2

1:8 max

10 – 20

Highly reactive butylated type curing agent for stoving, roller coatings and foil inks. For making mar-proof varnishes. Also recommended for acid catalysed wood finishes.

SR-3002

Melamine Formaldehyde

1 max

2% max

2

60 + 2

1:µ

2 – 4

Stoving enamels with turpentine tolerance, roller coatings, finishing varnishes.

SR-3004

Urea Formaldehyde

1 max

2% max

2

60 + 2

1:6 max

5 – 10

Slow curing agent used in epoxy system as well as alkyd systems. This also acts as a good wetting agent.

 

HARD RESINS – PURE PHENOLICS

PRODUCT CODE

SOFTENING POINT IN BALL & RING

ACID VALUE MAX

VISCOSITY AT 30oC in 50% SOLVENT SEC.

TOLERANCE IN MTO/SPIRIT

COLOUR OF 50% SOLN. ON GARDNER SCALE

SUGGESTED USES

SR-2101 (Novolac)

60 – 70o C

Phenolic Acidity

30 + 5

(50% in IMS)

1:µ

(In IMS)

2 max

(In IMS)

Spirit varnishes, flexographic inks for food wrappers, aniline inks, rust preventive lacquers, road marking and petrol resistant paints.

SR-2102

(Alkyd Phenol Resol type)

70 – 80o C

Phenolic Acidity

1 – 2 poise in 60% Xylene

Oil Soluble

2 max

(In Xylene)

Spar varnishes, marine enamels chemical resistant finishes. Tureg adducts for offset printing.


MALEIC MODIFIED – ROSIN DERIVATIVES

PRODUCT CODE

SOFTENING POINT IN BALL & RING

ACID VALUE MAX

VISCOSITY AT 30oC in 50%

TOLERANCE IN MTO/SPIRIT

COLOUR OF 50% SOLN. ON GARDNER SCALE

SUGGESTED USES

SR-2011

135 – 145o C

25

27 + 3

1:10 min.

(In MTO)

12 max

(In Toluene)

Compatible  with alkyds and used in high gloss synthetic enamels. Recommended in general inks, letter press and offset inks for good gloss.

SR-2012

135 – 145o C

30

23 + 3

1:3 min.

(In MTO)

12 max

(In Toluene)

NC Putty, NC lacquers, in vinyl lacquers for gloss.

SR-2021

135 – 150o C

120 – 135

30 + 5

(In IMS)

1:µ

(In IMS)

12 max

(In IMS)

High quality paper coatings vinyl lacquers for gloss.


ESTER GUM

PRODUCT CODE

SOFTENING POINT IN BALL & RING

ACID VALUE MAX

VISCOSITY AT 30oC in 50%

TOLERANCE IN MTO/SPIRIT

COLOUR OF 50% SOLN. ON GARDNER SCALE

SUGGESTED USES

SR-5001

97 – 103o C

15

16 + 2

1:µ

(In MTO)

12 max

(In Toluene)

Aluminium paints & Adhesives.

SR-5002

90 – 100o C

12

16 + 2

1:µ

(In MTO)

12 max

(In Toluene)

Adhesives, wax systems in hot melt adhesives, compatible with vinyl co-polymers. Hence, recommended for synthetic tile industry.


PHENOL MODIFIED – ROSIN DERIVATIVES

PRODUCT CODE

SOFTENING POINT IN BALL & RING

ACID VALUE MAX

VISCOSITY AT 30oC in 50% SOLVENT SEC.

TOLERANCE IN MTO

COLOUR OF 50% SOLN. ON GARDNER SCALE

SUGGESTED USES

SR-2002

125 – 135o C

25

35 + 5

1: µ

(in MTO)

12 max

(in Toluene)

For excellent drying, weather resistance, good hardness in photo-gravure inks, letter press & offset printing inks.

SR-2005

135 – 145o C

25

55 + 10

1: µ

(in MTO)

12 max

(in Toluene)

Excellent water repellant properties, good gloss in gravure printing ink, offset, letter press printing ink and good adhesion in paints along with alkyds.

SR-2007

145 – 155oC

25

55 + 10

1: µ

12 max

(in Toluene)

Quick set, Gloss offset inks, web offset, Heat set inks.

SR-2009

155 – 160oC

25

225 + 25

1: µ

12 max

(in Toluene)

Better gel structure, quick set, gloss offset inks, web offset, heat set inks.


LONG OIL ALKYDS

PRODUCT CODE

TYPE OF OIL

OIL LENGTH

TYPE OF POLYOL

% NVM

VOLATILES

ACID VALUE MAX

VISCOSITY AT 30oC BY FORDCUP NO:B4

(IN 50% MTO)

SUGGESTED USES

POISE

SEC

SR-1061

Soya

60

Penta

60 + 2

MTO

10

3 – 4

120 + 10

White and pastel shades, decorative enamels, roller coating white enamels and coloured lacquers.

SR-1060

Soya

60

Penta

99 + 1

-

10

3 – 3.5

110 + 10

High quality non-yellowing synthetic enamels and roller coating having excellent ZnO tolerance & good colour retention properties.

SR-1063

Soya

60

Penta

99 + 1

-

12

0.5 – 0.6

25 + 3

For making tin printing inks, polyester inks, white Tp inks for multiple stoving.

SR-1072

(Isophthalic)

Linseed

60

Glycerol

99 + 1

-

12

1 – 1.25

35 + 5

Printing Inks of heatset quality.

SR-1073

Linseed

60

Penta

99 + 1

-

12

1.25 – 2.0

60 + 10

Printing Inks, letter press, offset and silk screen inks.

SR-1074

Linseed

64

Penta

99 + 1

-

12

3 – 4

110 + 10

Primers, under coats and decorative enamels. First quality enamels and architectural finishes.

SR-1084

DCO

64

Penta

99 + 1

-

12

3 – 4

110 + 10

Varnishes, decorative enamels, roller coating enamels and varnishes.

 

SHORT OIL NON DRYING ALKYDS

PRODUCT CODE

TYPE OF OIL

OIL LENGTH

TYPE OF POLYOL

% NVM

VOLATILES

ACID VALUE MAX

VISCOSITY AT 30oC BY FORDCUP NO:B4

SUGGESTED USES

POISE

SEC

SR-1144

DCO

42

Glycerol

70 + 2

Mixed Xylene

25

2.5 – 3.0

(in 50% Xylene)

80 + 10

(in 50% Xylene)

Stoving enamels, acid curing finishes N.C. paints, primers & putty.

SR-1130

Coconut

30

Glycerol

70 + 2

Mixed Xylene

25

6 – 9

(in 50% Xylene)

200 + 20

(in 50% Xylene)

Stoving enamels with excellent colour retention, N.C. lacquers and roller coating varnishes and hard water white varnishes.

SR-1140

Coconut

35

Glycerol

70 + 2

Mixed Xylene

25

4 – 6

(in 50% Xylene)

160 + 20

(in 50% Xylene)

Stoving enamels, N.C. paints, clear lacquers isocyanate cured paints.

 

MEDIUM OIL ALKYDS

PRODUCT CODE

TYPE OF OIL

OIL LENGTH

TYPE OF POLYOL

% NVM

VOLATILES

ACID VALUE MAX

VISCOSITY AT 30oC BY FORDCUP NO:B4

SUGGESTED USES

POISE

SEC

SR-1151

Linseed

52

Glycerol

99 + 1

-

15

1.6 – 2

(in 40% MTO)

70 + 10

(in 40% MTO)

Decorative/Industrial paints and undercoats.

SR-1153

Linseed

52

Penta / Glycerol

50 + 2

MTO

15

8 – 10

(in 40% MTO)

250 + 25

(in 40% MTO)

Low cost industrial and architectural paints.

SR-2153

Mixed fatty acid

55

Glycerol

50 + 2

MTO

15

4.5 – 5

(in 40% MTO)

130 + 10

(in 40% MTO)

Air drying enamels and primers.Being rosin free also recommended for white enamels, IS 2932, roller coating enamels speciality coating and stoving finishes.

SR-2154

Mixed fatty acid

54

Penta / Glycerol

80 + 2

Distilled aromax

15

8 – 10

(in 40% soln.)

225 + 25

(in 40% soln.)

In roller coating finishes,non yellowing whites and tube coatings.

SR-1053

Soya

52

Penta

70 + 2

MTO

15

3 – 4

(in 40% MTO)

100 + 30

(in 40% MTO)

Mainly used for white enamelsand tube coating where colour retention properties are of importance.


SHORT OIL MODIFIED ALKYDS

PRODUCT CODE

TYPE OF OIL

OIL LENGTH

MODIFICATION

TYPE OF POLYOL

VOLATILES

% NVM

ACID VALUE MAX

VISCOSITY AT 30oC BY FORDCUP NO:B4

SUGGESTED USES

POISE

SEC

SR-1543

DCO

42

Rosin

Penta

MTO

50 + 2

20

5 – 6

(in 40% MTO)

150 + 10

(in 40% MTO)

For economical air drying & stoving paints,primers, undercoats.

SR-1850

Semi-drying

26

Acrylic

Penta / Glycerol

Aromax

55 + 2

15

30 – 35

(in 40% Aromax)


Crown cork decoration, PP cap decoration varnishes, lacquers, deep drawn systems with good vinyl compatibility, good dye stability with a pinch of tannic acid.

SR-1851

Semi-drying

33

Acrylic

Penta

Xylene

55 + 2

15

5 – 10

(in 55% Xylene)


High quality enamels which will give a good gloss coupled with good colour and adhesion. Hammertone finishes may be formulated.

 

SATURATED POLYESTER RESINS

PRODUCT CODE

NON VOLATILE %

NATURE

SOLVENT

VISCOSITY @30 oC BY FORD CUP NO.B4

ACID VALUE MGMS OF KOH/GM

MELTING POINT

SUGGESTED USES

XL-Ester-400

100

Solid Lumps

Ethyl Acetate

70 + 10 secs.

(in 50% EA)

< 20

115 + 5o C

For printing inks for polyester metallised BOPP & other difficult substrates with resins like N.C. Vinyl, Ketonic. This product is soluble in Ethyl Acetate alone.

XL-Ester-121

100

Water white to straw coloured liquid

MEK, EA, Spirit

140 – 160 poise (straight)

< 5

-

Polymeric plasticizer for PVC, N.C. Vinyl & other resins.

XL-Ester-680 (Oil Modified)

60% in Xylene & Toluene

Pale yellow colour liquid

Aromatic Hydrocarbons Ester & Ketones

70 + 10 secs.

(straight)

< 10

-

This product is suitable to manufacture two pack PU coatings for different applications. It can be used for manufacturing two comp PU paints and primers.

 

ACRYLIC RESINS

PRODUCT CODE

TYPE

POLYMER TYPE

% NVM

VOLATILES

SUGGESTED USES

SR-4230

Thermosetting

Hydroxy

60 + 2

Xylene:Butanol

3:1

Automotive finishes OEM and refinishing. General industrial stoving finishes, metal decoration products etc.

SR-4620

Thermosetting

Hydroxy

55 + 2

Xylene

Acrylic isocyanate system for wood finishes, industrial coatings, vehicle refinishing etc.

SR-4670

Thermosetting

Hydroxy

58 + 2

Xylene Cellosolve Acetate

In acrylic isocyanate systems for auto refinishing, transport finishes, aircraft coatings etc.

SR-4740

Thermoplastic

Acrylic

40 + 2

Xylene

Highly durable, colour and gloss retentive paints and lacquers in combination with NC, Vinyl, CAB. Also, recommended in wood lacquers, inks and PVC coatings.

 

WATER DISPERSIBLE ACRYLIC

PRODUCT CODE

TYPE

Non Volatile

Nature

Solvent

SUGGESTED USES

Aquasol-138

Acrylic Solution

60 + 2

Viscous Liquid

Iso Propyl Alcohol

For making water-base O.C. Varnish and Printing Ink Vehicle with very high heat resistance.

 

POLYAMIDE REACTIVE

PRODUCT CODE

APPEARANCE

AMINE VALUE

VISCOSITY STOKES AT 40oC

COLOUR AS SUCH

NON-VOLATILE

SUGGESTED USES

SR-940

Viscous liquid

360 – 400

35 – 50

11 max.

100 %

Curing agent for epoxy based castings, adhesives, laminates and coatings.

SR-925

Highly viscous liquid

300 – 340

80 – 120

11 max.

100%

High build epoxy polyamide coatings. Epoxy based adhesives and castings.

SR-915

Highly viscous liquid

220 – 250

450 – 600

11 max.

100 %

General purpose epoxy polyamide coatings, with excellent corrosion resistance.

 

POLYAMIDE NON-REACTIVE

PRODUCT CODE

TYPE

MELTING RANGE

(R & B)

ACID / AMINE

VALUE

VISCOSITY BY FORDCUP NO.B4 AT 30o C

SUGGESTED USES

SR-930

Non-reactive polyamide resin (Clear Lumps)

 Co-solvent

110 + 5o C

7 max

60 + 5 secs. (40% in Toluene Butanol 1:1)

Printing Inks.

SR-950

Non-reactive polyamide resin (Clear Lumps)

Spirit Soluble

115 + 5o C

7 max

20 + 3 secs. (35% in IPA)

Flexo Printing Inks. 

N.C. compatiable.

SR-960

Non-reactive polyamide resin

115 + 5o C

< 10

18 + 3 secs. (40% in IPA, Butanol & Toluene 1:1:1 proportion)

For flexographic HDPE inks having excellent adhesion on untreated HDPE woven sacks.

 

EURO ALKYD

PRODUCT CODE

TYPE

APPEARANCE

DENSITY @25oC

% Solids @120oC for 2 hrs

ACID VALUE OF SOLID RESIN MAX

VISCOSITY OF 50% SOLN. IN MTO AT 30oC BY FORDCUP NO:B4

SUGGESTED USES

SR-1880

Polyurethane Alkyd

Clear brownish yellow viscous resin

0.94 + 0.01

55 + 2

5

150 + 20

For use in clear or pigmented systems as one pack cure urethane finish. It is also used in marine varnishes, metal printers and fast drying decorative paints.

 

POLYURETHANE RESINS

PRODUCT CODE

TYPE

% NVM

VOLATILES

NATURE

SOLVENT

ACID VALUE MIGMS OF KOH/GM

SUGGESTED USES

SR-115

Hydroxyl terminated polyurethane

75 + 5

Ethyl Acetate

Water white to straw colour liquid

Ethyl Acetate & Spirit

< 1

For Printing Inks for plastic and metals application along-with N.C. can be used for leather and textiles.

SR-125

Hydroxyl terminated polyurethane

75 + 5

Ethyl Acetate

Water white to straw colour liquid

Ethyl Acetate

< 2

For Printing Inks for plastic and metals application along-with N.C. can be used for leather and textiles. It is high viscous compared to SR-115.

SR-144

Polyurethane Polymer

75 + 5

Ethyl Acetate

Clear Liquid

Ethyl Acetate

< 2

For use along with Nitrocellulose in gravure/flexo common inks for both Polyester and BOPP film to achieve excellent lamination strength, adhesion and running properties.

SR-225

Polyurethane polymer

30 + 2

Ethyl Acetate & MEK

Clear Liquid

Ethyl Acetate, MEK & Aromatic Hydrocarbon also can be used

< 1

It is unique resin for making lamination inks for BOPP & Polyester, as a common ink for both.

SR-230

Polyurethane polymer

30 + 2

Cyclohexanone

Clear Liquid

Ketonic, ester & hydrocarbon in combination

< 1

For manufacturing silk screen inks.

SR-135

Hydroxyl terminated Polyurethane

75 + 5

Ethyl Acetate

Water white to straw colour liquid

Ethyl Acetate

< 2

For use along with Nitrocellulose in gravure/flexo common inks for both polyester and BOPP film to achieve excellent lamination strength, adhesion and running properties.

SR-625

Polyurethane polymer

30 + 2

Ethyl Acetate & MEK

Clear Liquid

Ethyl Acetate, MEK, Aromatic Hydrocarbon & Ethyl Alcohols

< 1

For manufacturing solvent based gravure & flexo common inks of unique type, for both polyester and BOPP film to achieve excellent lamination strength, adhesion and running properties.

 

NCO TERMINATED POLYURETHANE RESINS

PRODUCT CODE

TYPE

NON VOLATILE %

NATURE

SOLVENT

NCO CONTENTS

SUGGESTED USES

Rotodur  
Y-75

NCO terminated Aromatic Polyurethane

75 + 2

Straw colour solution

Ethyl Acetate

13 + 0.5%

For curing OH terminated Polyesters and Acrylated polyester and other resins.

Rotodur

Y-50

NCO terminated Aromatic Polyurethane

50 + 2

Straw colour solution

Ethyl Acetate

8.5 + 0.5%

For curing OH terminated Polyesters and Acrylated polyester and other resins.